GigE High Performance Area Camera TAG-5 Series
Belonging to Tattile’s wide range of products dedicated to Machine Vision, TAG-5 is an area-scan CMOS GigE Camera, developed to satisfy high-performance applications.
TAG-5 is a technologically advanced compact digital camera, designed to meet the main requirements of machine vision.
Available in different resolutions from VGA to 4 MegaPixels, in both monochrome and color versions, TAG-5 is fully compatible with GigE Vision and GenICam standards; thus allowing a rapid software integration in the vision systems.
TAG-5 is characterized by a high frame rate: up to 300 fps for VGA version. This makes it perfectly suitable for applications in which the speed is an important feature.
The extremely compact design (only 34x34x54 mm) and Power over Ethernet supply (PoE) allow a quick and easy installation, at any inspection point.
The camera is equipped with:
- 1 RS232 serial port.
- 1 digital input.
- 1 digital output.
- 4 strobe outputs.
- Area Scan Global Shutter CMOS technology.
- Resolution from VGA to 4MP.
- GigE Vision and GenICam compliant.
- Easy cabling with Power over Ethernet (PoE).
- High frame rate up to 300 fps with VGA sensor.
- Multiple Strobo Output for lighting control.
- Partial Scan to reach high frame rate.
- Compact size of 34x34x54 mm.
The TAG-5 is the new-generation GigE camera platform for Industrial application. It is available in 3 resolutions: from VGA with a frame rate of 300 fps up to 4 Megapixels with a frame rate of 22 fps; all resolutions are available with mono and color sensors.
Based on advanced global shutter CMOS technology and GigE Vision protocol, the TAG-5 will fulfill your application requirement. The frame rate of the camera can be even increased thanks to the windowing features; in fact, the TAG-5 can capture only a portion of the image sensor allowing higher frames rate for smallest region of interest.
GigE Vision PoE
Thanks to the GigE Vision standard protocol, it does not require the use of any frame grabber, and the camera can be easily interfaced to embedded and PC-based vision system. The TAG-5 supports IEEE 1588 precise time protocol, enabling accurate synchronization with multi-camera acquisition In addition to the standard 24 VDC power supply, the camera can be powered by PoE (Power over Ethernet) for easy cabling.
The camera offers a rs232 serial port, 4 Strobo channels for illuminator strobing and control, one input and one output opto-isolated.
|Frame rate||300 fps||298 fps||44 fps||22 fps||15 fps|
|Sensor type||1/4” CMOS||1/3” CMOS||2/3” CMOS||1” CMOS||2/3” CMOS|
|Pixel size||4.8 x 4.8 μm||7.4 x 7.4 µm||5.5 x 5.5 µm||5.5 x 5.5 µm||3.45 x 3.45 µm|
|Sync||External trigger / Ethernet / Free run|
|Digital inputs||1 PNP protected|
|Digital outputs||1 open collector protected|
|Power supply||+24 V DC / PoE|
|Power over Ethernet||IEEE 802.3 af|
|Dimensions||34x34x54 mm | 34x34x54 mm | 34x34x59 mm | 34x34x59 mm|
|Internal Protection||IP 42|
|F01552||640×480 298 fps mono|
|F01553||640×480 298 fps color|
|F01603||2048×1088 44 fps mono|
|F01604||2048×1080 44 fps color|
|F01554||2048×2048 22 fps mono|
|F01555||2048×2048 22 fps color|
|F01699||640×480 300 fps color|
||2448×2048 15 fps mono|